For filter manufacturers and equipment buyers, ordering carbon foam starts with two decisions: the material your filter needs and the form your production line can use. Junkang supplies open-cell polyurethane foam carrying powdered activated carbon as sheets or custom-cut pads. Send an existing sample, a drawing or the dimensions you already have to start a quotation.
Free samples are available; customers pay shipping. Minimum order quantities depend on the product, dimensions, cutting and packaging requirements. We reply within one business day.
Buying sheets or finished cut pads?
Choose sheets if you want to cut the material on your own line. Request the sheet dimensions, thickness, PPI and number of sheets. If you already know the finished pad sizes, include them so the sheet and cutting requirements can be reviewed together.
Choose cut pads if you want the supplied material to arrive in the shape used by your assembly. Send the finished dimensions and quantity for each size. A drawing is useful for holes, notches and critical edges; a clear photo with a ruler can start the discussion when a drawing is not available.
These are two supply formats for a material, not a promise to reproduce every complete filter assembly. If your project also needs a frame, housing, adhesive or another layer, identify it separately for review.
What carbon foam specification should you request?
Start with the following fields rather than asking only for “black filter foam.”
| Purchase detail | What to put in your request |
|---|---|
| Application | Air purifier, ventilation component or another identified air-filtration application |
| Material | Open-cell PU foam carrying activated carbon |
| Supply format | Sheets or cut pads; quantities by size |
| Dimensions | Length, width and thickness, with units |
| Pore density | Required PPI, or “not known” if you are starting from a sample |
| Operating requirement | Target odor or gas, and known airflow or pressure-drop requirement |
| Acceptance requirement | Fit, drawing revision and any specified testing or flame-retardant requirement |
Junkang's published series covers 10–60 PPI and 3–100 mm thickness. These are series ranges, not a statement that every combination is available. The product specification page gives the full catalog values and the conditions attached to them.
PPI describes pore density. It does not by itself establish gas-removal performance. Similarly, a pressure-drop value is useful only when its thickness and airflow conditions match the comparison you are making. Do not select a material from PPI or color alone.
Can I use an aquarium foam listing or assume the carbon pad is washable?
Check the intended application before comparing products sold under similar names:
- Air versus water filtration: this guide covers carbon foam for air-filtration projects. An aquarium or liquid-filtration listing is not evidence that a material meets your air-filter specification. Identify the proposed material and review its suitability for your equipment; do not assume approval for water contact from an air-filtration description either.
- Cleaning and reuse: do not assume that a carbon-loaded pad is washable because an uncoated foam or another seller's product is described that way. Request instructions for the exact grade and evidence for performance after the proposed cleaning process. A clean appearance alone does not establish remaining odor-removal capacity.
If washability or use in water is required, state it at the start of the inquiry. It is a requirement to review, not a confirmed feature of the material described here.
Make two quotations comparable
For a sheet quote, record the number and dimensions of sheets. For a pad quote, record the number of finished pieces by size. Ask whether cutting and packing are included, and keep freight separate so that you can compare the same delivery basis.
If you are comparing sheets for your own cutting with ready-cut pads, include the work you will still need to do in-house. The lowest price per square meter is not necessarily the lowest delivered cost per usable pad. Our rolls, sheets and cut-parts guide explains the quantity and area calculations without assuming a cutting yield for your design.
Use the sample to approve a defined part
Keep the proposed sample identified with its material reference and drawing revision. Check it in the intended holder, then review the agreed material and performance requirements. A fit check and a gas-removal test answer different questions; neither should silently stand in for the other.
Before a production order, record the agreed material, dimensions, quantity, packing and acceptance requirements. If the proposed sample differs from the original part, record the difference instead of treating a similar appearance as proof of equivalence.
What should a carbon foam sample comparison record include?
Compare the existing part and the proposed sample under the same agreed conditions. Keep three decisions separate:
- Fit: record the drawing revision, dimensions and units, thickness, and how the pad is held in the assembly. Note any compression or gaps around the edges.
- Airflow: record the exposed face area, airflow or face velocity, sample thickness and measured pressure drop. Identify whether the result is for the material alone or the assembled filter.
- Odor or gas removal: identify the target substance, inlet concentration, airflow, temperature, humidity, test duration and agreed acceptance criterion. A result without its test conditions is not a like-for-like comparison.
Mark untested items as “not tested,” not “passed.” Ask the supplier to identify the material reference covered by any test report; a report for a different foam construction does not establish the performance of your proposed pad. These are review questions, not a claim that every test or performance level is available from Junkang.
A short request you can send
We are sourcing activated carbon foam for [equipment/application]. We need [sheets/cut pads] in [dimensions and units], at [thickness] and [PPI, if known]. Initial quantity: [quantity by size]. Target odor or gas: [if known]. Attached reference: [drawing/sample photo/specification]. Please confirm a proposed material, the order minimum, sample shipping cost and quotation basis.
You do not need to complete every field before contacting us. Send what you have, and identify what still needs to be decided.
Request a foam sample or quotation
Send your foam requirement, or email a drawing or photo to sales@junkangfilter.com. Samples are free, shipping is paid by the customer, and we reply within one business day. Production quantity and delivery arrangements are confirmed with your quotation.
Looking for a fibrous material rather than foam? Compare carbon-impregnated polyester media. For a separate dust stage, see white polyester pre-filter media.