Procurement guide · Junkang Filter Media

How to Qualify a Second Supplier for Carbon-Impregnated Polyester Filter Media

Compare a second supplier of carbon-impregnated polyester filter media: material identity, specifications, production fit, sample approval and quotation requirements.

Request a sample or quotation

When you need another source for an existing carbon-loaded polyester material, start with the approved material and its use in your filter. A second supplier needs enough information to propose a comparable material, explain any differences and provide a sample for your evaluation—not just match a black surface and a nominal thickness.

Junkang supplies PET polyester media carrying powdered activated carbon in rolls, sheets and cut parts. Samples are free, customers pay shipping, and we reply within one business day. Minimum order quantities depend on the product, dimensions, cutting and packaging requirements.

First, identify the material you are replacing

“Carbon filter media” can describe several different constructions. Confirm whether the current material is polyester fiber loaded with carbon, a layered sandwich nonwoven, activated carbon fiber felt or carbon foam. An existing specification, a sample and photos of the material edge help explain the construction.

Our carbon-impregnated polyester media uses PET as the supporting fiber; the fiber itself is not activated carbon fiber. If the existing material is ACF or sandwich media, say so rather than assuming that the same thickness makes it interchangeable.

Prepare a comparison record before requesting prices

Use one record for the current approved material and each proposed alternative. A blank field is a question to resolve, not a reason to guess a value.

Item Current approved material Proposed alternative
Material identity Supplier reference and construction Proposed reference and construction
Supply format Roll, sheet or cut part Proposed format and dimensions
Thickness and weight Requirement, units and measurement method Declared values and any differences
Carbon loading Quantity, units and calculation basis, if specified Comparable basis or a stated information gap
Airflow resistance Test conditions and acceptance requirement Result under stated conditions, or test to be agreed
Gas/odor requirement Target and test or application requirement Evidence available and evaluation still needed
Delivery specification Packing, identification and required quantity Quoted packing, identification and quantity

Keep the comparison tied to a proposed grade. Junkang's 1–30 mm thickness range describes a series, not a single replacement model. A catalog result for one thickness does not automatically apply to another. Start from the full PET specification and the one-page procurement summary.

Separate three approval questions

1. Will it work in your production process?

A matching width and thickness do not establish that a replacement will behave the same way in your production process. Trial the proposed grade using the cutting, handling and assembly steps that matter for your part.

What should you check during a converting trial?

Record the sample reference, drawing revision and trial conditions, then check:

  • Cut dimensions: measure finished pieces against the agreed drawing and tolerances.
  • Edges and loose material: note whether cutting or handling leaves loose fibers or carbon that would affect your process. Agree acceptable limits rather than assuming that any material is dust-free.
  • Assembly fit: check the pad in its intended holder and record any change needed to fit or retain it.
  • Bonding or additional layers: assess the actual combination used in your part. A flat-sheet sample alone does not establish compatibility with an adhesive or another layer.

Record each observation as acceptable, not acceptable or requiring another review, with photos where useful. Keep the approved sample reference with the trial record so a later order can be checked against the same requirements.

A successful handling trial is not evidence of odor-removal performance. Keep the production-fit record separate from the airflow and adsorption evidence used to approve the application.

2. Does the proposed material meet the agreed performance requirement?

Compare results only with their sample identity and test conditions. Ask what each report covers: the proposed medium, the carbon used in it or a finished filter. Evidence for one is not automatically evidence for all three. Our test-report scope guide explains the distinction.

3. Can the quotation be turned into a repeatable order?

Agree the material reference, drawing or specification revision, supply format, packing and acceptance requirements. Identify changes that would need another review before supply. Keep an approved reference sample where your purchasing and quality teams can trace it to the order.

Compare price on the same supply basis

A price per roll needs a defined width and length. A price per piece needs finished dimensions and a piece count. Compare shipping, packing and any cutting work on the same basis. A lower unit price is not enough to establish an equivalent offer if the supplied format or specification is different.

Ask for an initial-order quote and state expected repeat demand separately, if you know it. That gives the supplier a useful quantity to review without presenting an estimate as a firm purchasing commitment.

Send a second-source request

We are evaluating a second source for carbon-impregnated polyester media used in [application]. Our current material/reference is [reference]. Required format and dimensions: [details]. Initial order quantity: [quantity]. We can provide [sample/specification/photos]. Please identify your proposed material, differences from our requirement, available supporting documents, order minimum and sample shipping cost.

Contact Junkang about PET media, or send your existing specification to sales@junkangfilter.com. We offer free samples with shipping paid by the customer and reply within one business day. Sample evaluation is the starting point; it is not a declaration that an alternative is already approved for your equipment.